Tools, Materials & Safety


D-Handle or T-Handle, Made from heavy duty steel

Our tile lifter bars are made in the United States, each weighing approximately 17 lbs and made with heavy duty steel. The bar shaft measures 53.5” long, with a tapered 7.5” flange, housing 2 slots for blade insertion. Two rounded carriage bolts and nuts are used to hold the scraper blade in place. Scraper blades sold separately.


2”, 3.5” and 6” – Heavy duty steel Heat treated

We offer three different size blades which fit our 2 slot tile lifter bars. They are the ultimate blades for the toughest removals. Our blades are made from heavy duty steel and heat treated to ensure a long life.

Our 2” x 7.5” are ground on both ends, which allows double the usage. They are perfect for those small, narrow, hard-to-reach spaces.

Our 3.5" x 7.5" and our 6" x 7.5" blades are ground on one end at an angle designed to achieve the optimum shear point.


3 Rooms, Lightweight, Strong & Sturdy, wrapped with 6 mil Fire Retardant Poly

Twin-Chemicals low-cost, lightweight, disposable showers are remarkably strong and sturdy. Each room is double-wrapped with 6-mil Fire-Retardant poly. Each stage measures 36”x36”x77” or 48”x48”x77” with the middle stage occupying a reinforced plastic bottom to add rigidity and prevent mold or mildew from accumulating. **Pole sets offered separately.

MASTASORB - Absorbent

Absorbs up to 10 times its weight!

When it comes to absorbing asbestos floor mastic that has been chemically liquefied, nothing is more effective than Mastasorb. This fiberized, wood-based product absorbs up to 10 times its weight which allows one bale to solidify between 2000 to 2500 square feet of liquid mastic clean up and is quicker, safer, and more efficient. Each bale weighs approximately 30 lbs.


10” or 12” wire reinforced, 2 mil, reusable flex duct for negative air machines

Sold by the case. . .each case contains 4 sections and each section is 25 ft. The 10” flex duct is offered in clear only. The 12" flex duct is offered in clear or silver.